September 18
Floor insulation.
It's been a while since our last update. Last month we went for a 3,300-mile ride (Sean's pics;Rhonda's pics); the preceding weekends were used for bike and rider prep. Never fear! We haven't abandoned the bus...or you, dear reader! :-)
The first steps in preparing the metal floor were to paint it with a rust-inhibiting primer and then seal the holes. Then we covered the floor with 1/2" rigid foam insulation, followed by a 6-mil vapor barrier, and finally 1/2", 5-ply plywood.
Read More
1 piece of insulation on the primered floor
Floor insulation complete.
Plywood subfloor; extra vapor barrier material around the edges. We'll cover the wheel humps with wooden boxes filled with insulation scraps.